# General Manufacturing

**URL:** https://forum.deltamotion.com/c/knowledge-base-examples/general/31.md

[Latest](https://forum.deltamotion.com/latest.md) · [Categories](https://forum.deltamotion.com/categories.md) · [Tags](https://forum.deltamotion.com/tags.md)

---

## [About the General Manufacturing category](https://forum.deltamotion.com/t/about-the-general-manufacturing-category/801)

<div class="topic-metadata">

**Author:** [@dmcnichol](https://forum.deltamotion.com/u/dmcnichol)\
**Replies:** 0

</div>

This section has topics and/or RMCTools Project examples that can be applied to a wide variety of systems. Typical applications discussed here are custom or unique systems designed for a specific end use, but the motion …

---

## [Valve Linearization via Curves](https://forum.deltamotion.com/t/valve-linearization-via-curves/376)

<div class="topic-metadata">

**Author:** [@Jacob\_Paso](https://forum.deltamotion.com/u/Jacob_Paso)\
**Replies:** 0\
**Last updated:** [January 8, 2016, 7:50pm UTC](https://forum.deltamotion.com/t/valve-linearization-via-curves/376 "2016-01-08T19:50:39Z")

</div>

NOTE: This topic is now outdated! RMCTools now has an easy-to-use, built-in feature for valve linearization via curves. See Valve Linearization in the RMCTools help for details. ------OLD INFORMATION--------------------…

---

## [Detecting a failed accumulator?](https://forum.deltamotion.com/t/detecting-a-failed-accumulator/591)

<div class="topic-metadata">

**Author:** [@Peter\_K](https://forum.deltamotion.com/u/Peter_K)\
**Replies:** 1\
**Last updated:** [June 19, 2019, 5:15pm UTC](https://forum.deltamotion.com/t/detecting-a-failed-accumulator/591 "2019-06-19T17:15:46Z")

</div>

My company, like many, makes a range of customized standard products for our customer base. I have implemented an RMC75 into this system to control the machine’s motion during operation. Recently, we built and ship…

---

## [Integrator On In Position](https://forum.deltamotion.com/t/integrator-on-in-position/304)

<div class="topic-metadata">

**Author:** [@Jacob\_Paso](https://forum.deltamotion.com/u/Jacob_Paso)\
**Replies:** 1\
**Last updated:** [July 24, 2015, 5:35pm UTC](https://forum.deltamotion.com/t/integrator-on-in-position/304 "2015-07-24T17:35:11Z")

</div>

NOTE: This topic is now outdated! RMCTools now has an easy-to-use, built-in Integrator Mode. See Default Integrator Mode in the RMCTools help for details. ------OLD INFORMATION-------------------------------------------…

---

## [DMCP Example for Linux in C](https://forum.deltamotion.com/t/dmcp-example-for-linux-in-c/201)

<div class="topic-metadata">

**Author:** [@Jacob\_Paso](https://forum.deltamotion.com/u/Jacob_Paso)\
**Replies:** 2\
**Last updated:** [June 19, 2014, 6:47pm UTC](https://forum.deltamotion.com/t/dmcp-example-for-linux-in-c/201 "2014-06-19T18:47:56Z")

</div>

The Delta Motion Control Protocol (DMCP) is a simple Ethernet protocol intended for use with direct communication to the RMC75E, RMC150E, and RMC200 over TCP or UDP. In applications where none of the RMC’s other protocol…

---

## [Identical Motion on Multiple Axes](https://forum.deltamotion.com/t/identical-motion-on-multiple-axes/302)

<div class="topic-metadata">

**Author:** [@Jacob\_Paso](https://forum.deltamotion.com/u/Jacob_Paso)\
**Replies:** 2\
**Last updated:** [March 26, 2014, 4:37pm UTC](https://forum.deltamotion.com/t/identical-motion-on-multiple-axes/302 "2014-03-26T16:37:24Z")

</div>

This topic describes how to perform the type of synchronized motion where all the axes always need to be at identical positions. This is typical of mechanically coupled or linked axes. This procedure assumes the axes ar…