# August 27, 2020 - Using PLCs with RMCs

**URL:** <https://forum.deltamotion.com/t/august-27-2020-using-plcs-with-rmcs/778>\
**Category:** Webinars\
**Created:** [August 27, 2020, 10:39pm UTC](https://forum.deltamotion.com/t/august-27-2020-using-plcs-with-rmcs/778 "2020-08-27T22:39:05Z")\
**Posts on this page:** 1\
**Page:** 1

<div class="post-metadata">

**Author:** ![Aaron\_Heinrich](https://forum.deltamotion.com/letter_avatar_proxy/v4/letter/a/54ee81/32.png) [@Aaron\_Heinrich](https://forum.deltamotion.com/u/Aaron_Heinrich)\
**Post date:** [August 27, 2020, 10:39pm UTC](https://forum.deltamotion.com/t/august-27-2020-using-plcs-with-rmcs/778/1 "2020-08-27T22:39:05Z")

</div>

Delta’s Product Development Manger Jacob Paso demonstrates the versatile communications built in to the RMC motion controllers. Delta RMCs support a wide variety of industrial communications protocols, and make the setup process as simple as possible. During this webinar, Jacob will be demonstrating PLC - RMC communications configuration and troubleshooting, using an Allen-Bradley PLC as an example.

_If you haven’t used Delta’s RMCTools software before, we recommend watching one of our tutorial videos to become familiar with the menus and where things are located in the software._

[https://deltamotion.com/education/videos/](https://deltamotion.com/education/videos/)