# Computing the Spring Constant of a ...

**URL:** <https://forum.deltamotion.com/t/computing-the-spring-constant-of-a/115>\
**Category:** Motion System Design\
**Created:** [December 30, 2010, 7:05pm UTC](https://forum.deltamotion.com/t/computing-the-spring-constant-of-a/115 "2010-12-30T19:05:44Z")\
**Posts on this page:** 1\
**Page:** 1

<div class="post-metadata">

**Author:** ![Peter\_Nachtwey](https://forum.deltamotion.com/letter_avatar_proxy/v4/letter/p/f17d59/32.png) [@Peter\_Nachtwey](https://forum.deltamotion.com/u/Peter_Nachtwey)\
**Post date:** [December 30, 2010, 7:05pm UTC](https://forum.deltamotion.com/t/computing-the-spring-constant-of-a/115/1 "2010-12-30T19:05:44Z")

</div>

Computing the spring constant of a single direction acting cylinder.  
A spring constant has units of force/length so a hydraulic spring constant should have the same units.  
The spring constant for one side of a hydraulic cylinder is β\*A^2/V

Where:  
β is the bulk modulus of oil and has units of force/area. This number is about 200,000 psi when things are ideal but is typically lower  
A is the area of the piston being acted on.  
V is the trapped volume of oil between the valve and the piston assuming there is no hose.

The units for β\*A^2/V is force/length

If there is hose then the calculations get to be more difficult because there is little data about the hydraulic capacitance of most hoses.
