# Dose rmc75s support serial RS-422？

**URL:** <https://forum.deltamotion.com/t/dose-rmc75s-support-serial-rs-422/1412>\
**Category:** Communications\
**Created:** [March 25, 2025, 3:23am UTC](https://forum.deltamotion.com/t/dose-rmc75s-support-serial-rs-422/1412 "2025-03-25T03:23:38Z")\
**Posts on this page:** 2\
**Page:** 1

<div class="post-metadata">

**Author:** ![simon](https://forum.deltamotion.com/letter_avatar_proxy/v4/letter/s/f07891/32.png) [@simon](https://forum.deltamotion.com/u/simon)\
**Post date:** [March 25, 2025, 3:23am UTC](https://forum.deltamotion.com/t/dose-rmc75s-support-serial-rs-422/1412/1 "2025-03-25T03:23:38Z")

</div>

This is a dual - axis device. I want to use RMC75S to receive two command positions sent via RS - 422 at a baud rate of 460800, every 5ms. Does RMC75S support Serial RS - 422 ? If RMC75S doesn’t support RS - 422, I’ll opt for RMC75E. Could you recommend an adapter to convert RS - 422 to Modbus TCP or other supported signal types?

---

<div class="post-metadata">

**Author:** ![Jacob\_Paso](https://forum.deltamotion.com/letter_avatar_proxy/v4/letter/j/439d5e/32.png) [@Jacob\_Paso](https://forum.deltamotion.com/u/Jacob_Paso)\
**Post date:** [March 25, 2025, 3:56pm UTC](https://forum.deltamotion.com/t/dose-rmc75s-support-serial-rs-422/1412/2 "2025-03-25T15:56:34Z")

</div>

The RMC75S serial ports do not support serial RS-422 communications. The RS-232 monitor port only supports RS-232, and the second port supports RS-232 and RS-485 (but not both simultaneously).

In order to possibly recommend a converter, I need more information. RS-422 defines the wiring and voltage levels on the wire. What protocol is being used over the RS-422?

-Jacob
