# MathCad  and  Maxima

**URL:** <https://forum.deltamotion.com/t/mathcad-and-maxima/264>\
**Category:** Motion System Design\
**Created:** [January 29, 2014, 1:41pm UTC](https://forum.deltamotion.com/t/mathcad-and-maxima/264 "2014-01-29T13:41:44Z")\
**Posts on this page:** 4\
**Page:** 1

<div class="post-metadata">

**Author:** ![mars\_bruce\_lee](https://forum.deltamotion.com/letter_avatar_proxy/v4/letter/m/a587f6/32.png) [@mars\_bruce\_lee](https://forum.deltamotion.com/u/mars_bruce_lee)\
**Post date:** [January 29, 2014, 1:41pm UTC](https://forum.deltamotion.com/t/mathcad-and-maxima/264/1 "2014-01-29T13:41:44Z")

</div>

hydraulic servo design in math, there There are two software，MathCad and Maxima。

How should i choose？

what’s the different between them？

---

<div class="post-metadata">

**Author:** ![mars\_bruce\_lee](https://forum.deltamotion.com/letter_avatar_proxy/v4/letter/m/a587f6/32.png) [@mars\_bruce\_lee](https://forum.deltamotion.com/u/mars_bruce_lee)\
**Post date:** [February 25, 2014, 9:56am UTC](https://forum.deltamotion.com/t/mathcad-and-maxima/264/2 "2014-02-25T09:56:14Z")

</div>

Peter can you help me.  
I see that some your documents about hydraulic motion control,some are using Maxima,Some are using mathcad.  
I want to konw the Application in hydraulic motion control.

---

<div class="post-metadata">

**Author:** ![Peter\_Nachtwey](https://forum.deltamotion.com/letter_avatar_proxy/v4/letter/p/f17d59/32.png) [@Peter\_Nachtwey](https://forum.deltamotion.com/u/Peter_Nachtwey)\
**Post date:** [February 25, 2014, 6:42pm UTC](https://forum.deltamotion.com/t/mathcad-and-maxima/264/3 "2014-02-25T18:42:21Z")

</div>

I said in another thread I wouldn’t buy Mathcad now because it is obsolete and probably not supported by PTC, the company that made Mathcad.  
I provided a list of programs to try.

I used Mathcad in this application.  
[machinedesign.com/hydraulics/ele … e-research](http://machinedesign.com/hydraulics/electrohydraulics-drives-engine-research)  
It required solving many differential equations simultaneously to do the simulation. Scilab may have been better but I already had a simulation that I could modify in Mathcad.  
There are no simple answers. You have to understand the physics of hydraulic and be able to do the math it requires.

---

<div class="post-metadata">

**Author:** ![ndzied1](https://forum.deltamotion.com/letter_avatar_proxy/v4/letter/n/77aa72/32.png) [@ndzied1](https://forum.deltamotion.com/u/ndzied1)\
**Post date:** [March 7, 2014, 4:03pm UTC](https://forum.deltamotion.com/t/mathcad-and-maxima/264/4 "2014-03-07T16:03:32Z")

</div>

I believe PTC is still developing Mathcad but they have totally changed the interface and file structure.

The last version I paid for is Mathcad 14.

However, I do use the free version of their new product called PTC MathCAD Prime 3.0 Express  
[ptc.com/product/mathcad/free-trial/](http://www.ptc.com/product/mathcad/free-trial/)

It does all the basics and my main reason for it is the unit conversion capability.  
Besides limiting functionality, it does add a footer to all printouts that says:

> [@](#):
>
> Created with Mathcad Express. See [mathcad.com](http://www.mathcad.com) for more information.
