# Temposonics II Transducer with Digital Personality Module (DPM)

**URL:** <https://forum.deltamotion.com/t/temposonics-ii-transducer-with-digital-personality-module-dpm/1281>\
**Category:** Knowledge Base: Troubleshooting\
**Created:** [June 28, 2024, 3:35pm UTC](https://forum.deltamotion.com/t/temposonics-ii-transducer-with-digital-personality-module-dpm/1281 "2024-06-28T15:35:40Z")\
**Posts on this page:** 1\
**Page:** 1

<div class="post-metadata">

**Author:** ![Paul\_Huumala](https://forum.deltamotion.com/letter_avatar_proxy/v4/letter/p/22d042/32.png) [@Paul\_Huumala](https://forum.deltamotion.com/u/Paul_Huumala)\
**Post date:** [June 28, 2024, 3:35pm UTC](https://forum.deltamotion.com/t/temposonics-ii-transducer-with-digital-personality-module-dpm/1281/1 "2024-06-28T15:35:40Z")

</div>

Temposonics II transducers with the Digital Personality Module (DPM) can interface with the RMCs. These transducers need to be configured for External Interrogation which is indicated as the **E** towards the end of the PN (TTS … D **E** 004)

Steps to use this transducer:

1. Configure as External Interrogation. The manual below contains steps to change the Interrogation method.  
[550093.pdf](https://forum.deltamotion.com/uploads/short-url/nhDHc2Xy5HwAr0A8GfDIEWchF9i.pdf) (439.3 KB)

2. Wire the transducer as External Interrogation. Pins 9 and 10 below must be connected.  

3. Configure the RMC’s position feedback as a PWM input.

4. In the RMCTools software scale and offset wizard, include the number of recirculations indicated by the last 3 numbers of the part number. In the example above, the number of recirculations is 4.