# The integrated protocol model of BALLUFF start/stop sensors

**URL:** <https://forum.deltamotion.com/t/the-integrated-protocol-model-of-balluff-start-stop-sensors/466>\
**Category:** Motion System Design\
**Created:** [August 23, 2018, 1:41pm UTC](https://forum.deltamotion.com/t/the-integrated-protocol-model-of-balluff-start-stop-sensors/466 "2018-08-23T13:41:48Z")\
**Posts on this page:** 4\
**Page:** 1

<div class="post-metadata">

**Author:** ![phil.liu](https://forum.deltamotion.com/letter_avatar_proxy/v4/letter/p/b5ac83/32.png) [@phil.liu](https://forum.deltamotion.com/u/phil.liu)\
**Post date:** [August 23, 2018, 1:41pm UTC](https://forum.deltamotion.com/t/the-integrated-protocol-model-of-balluff-start-stop-sensors/466/1 "2018-08-23T13:41:48Z")

</div>

A normal START/STOP signal consists of a interrogation signal and a start-stop signal.  
But there is a special mode in the BALLUFF sensor,You can download the attachment and view the document on page 14, and introduces the common DPI and special IP mode.  
When the interrogation signal (INIT) at 1-5 us, sensor into DPI mode, when the interrogation signal (INIT) at 10 to 50 us, sensor into IP mode.  
I know we can receive RMC75E - MA2 DPI pattern of data, but I want to know whether can support IP mode.If can be supported, I should take what Settings  
[DOK\_919698\_02\_000.pdf](https://forum.deltamotion.com/uploads/default/original/1X/7e85bf85fc743610df32433cb4eadd8d48a3343a.pdf) (5 MB)

---

<div class="post-metadata">

**Author:** ![phil.liu](https://forum.deltamotion.com/letter_avatar_proxy/v4/letter/p/b5ac83/32.png) [@phil.liu](https://forum.deltamotion.com/u/phil.liu)\
**Post date:** [August 23, 2018, 1:48pm UTC](https://forum.deltamotion.com/t/the-integrated-protocol-model-of-balluff-start-stop-sensors/466/2 "2018-08-23T13:48:27Z")

</div>

![20180823214049.png](https://forum.deltamotion.com/uploads/default/original/1X/df40445c0049acea86f7faabfa2cbb87c00a37f6.png)

---

<div class="post-metadata">

**Author:** ![phil.liu](https://forum.deltamotion.com/letter_avatar_proxy/v4/letter/p/b5ac83/32.png) [@phil.liu](https://forum.deltamotion.com/u/phil.liu)\
**Post date:** [August 23, 2018, 1:50pm UTC](https://forum.deltamotion.com/t/the-integrated-protocol-model-of-balluff-start-stop-sensors/466/3 "2018-08-23T13:50:25Z")

</div>

![20180823214952.png](https://forum.deltamotion.com/uploads/default/original/1X/7fa82be7b3b248a0198a15f7f094ebab662cad44.png)

---

<div class="post-metadata">

**Author:** ![Jacob\_Paso](https://forum.deltamotion.com/letter_avatar_proxy/v4/letter/j/439d5e/32.png) [@Jacob\_Paso](https://forum.deltamotion.com/u/Jacob_Paso)\
**Post date:** [August 23, 2018, 3:41pm UTC](https://forum.deltamotion.com/t/the-integrated-protocol-model-of-balluff-start-stop-sensors/466/4 "2018-08-23T15:41:04Z")

</div>

Phil,

The RMC’s do not support the Balluff IP mode.