# Upload plots from excel back to back

**URL:** <https://forum.deltamotion.com/t/upload-plots-from-excel-back-to-back/460>\
**Category:** Programming\
**Created:** [May 15, 2018, 4:23pm UTC](https://forum.deltamotion.com/t/upload-plots-from-excel-back-to-back/460 "2018-05-15T16:23:19Z")\
**Posts on this page:** 1\
**Page:** 1

<div class="post-metadata">

**Author:** ![Paul\_Huumala](https://forum.deltamotion.com/letter_avatar_proxy/v4/letter/p/22d042/32.png) [@Paul\_Huumala](https://forum.deltamotion.com/u/Paul_Huumala)\
**Post date:** [May 15, 2018, 4:23pm UTC](https://forum.deltamotion.com/t/upload-plots-from-excel-back-to-back/460/1 "2018-05-15T16:23:19Z")

</div>

This example is for continuously uploading consecutive plots from Excel using RMCLink. RMCLink itself includes an example that uploads plots, but that example requires a sufficient delay between plots to upload them. The example presented here can upload plots for a motion cycle that does not pause. This method uses Plot Template 0 and Plot Template 1, which need to be identical. The user program needs to send Start Plot 0 command for the first cycle, then Start Plot 1 for the next cycle, then Start Plot 0 for the next cycle, ect. A user program is attached that starts one plot template for extend and other for retracting.

Note: Plot lengths shorter than 1.5 seconds may result in some plots not being uploaded.  
[PlotUploadPingPong.rmcproj](https://forum.deltamotion.com/uploads/default/original/1X/bd2072cafbb5ce15c91b6333e2f67e2ef611baa2.rmcproj) (80 KB)  
[RMC150PlotUploadPingPong.xlsm](https://forum.deltamotion.com/uploads/default/original/1X/18a584075927ceedb2a3465b5aec4e134e37c509.xlsm) (373 KB)  
[RMC200PlotUploadPingPong.xlsm](https://forum.deltamotion.com/uploads/default/original/1X/1f4278fd07838196c509fdc249170923a2184c3c.xlsm) (378 KB)  
[RMC70PlotUploadPingPong.xlsm](https://forum.deltamotion.com/uploads/default/original/1X/b7e5a3e51bd54a32b534fb1fb6fc93d04c5c625a.xlsm) (379 KB)
