# Where to find wiring diagrams

**URL:** <https://forum.deltamotion.com/t/where-to-find-wiring-diagrams/24>\
**Category:** Motion System Design\
**Created:** [January 17, 2008, 7:23pm UTC](https://forum.deltamotion.com/t/where-to-find-wiring-diagrams/24 "2008-01-17T19:23:07Z")\
**Posts on this page:** 1\
**Page:** 1

<div class="post-metadata">

**Author:** ![Jacob\_Paso](https://forum.deltamotion.com/letter_avatar_proxy/v4/letter/j/439d5e/32.png) [@Jacob\_Paso](https://forum.deltamotion.com/u/Jacob_Paso)\
**Post date:** [January 17, 2008, 7:23pm UTC](https://forum.deltamotion.com/t/where-to-find-wiring-diagrams/24/1 "2008-01-17T19:23:07Z")

</div>

We often receive questions about where to find wiring diagrams, schematics or pin-outs for the RMC75, RMC150, and RMC200. Here are the various places you can find wiring informaton:

**RMC200 Startup Guide** , RMC150 Start-Up Guide or RMC70 Startup Guide.  
This is shipped with each unit and can also be downloaded as follows:

_Go to [http://www.deltamotion.com/](http://www.deltamotion.com/)._  
_On the upper horizontal menu bar, click **Support & Training** , then select **Downloads**._  
_On the left vertical menu under **RMC200** , **RMC150/151** or **RMC70** , click **Manuals**._  
_Choose **RMC200 Startup Guide** , **RMC150 Startup Guide** or **RMC70 Startup Guide**._

This startup guides are fairly short (approx. 40 pgs) and may be worth printing if you do not have the copy that was shipped with the unit. The wiring diagrams are toward the back in Appendix A.

RMCTools Help  
This is included in the RMCTools software:

_On the Help menu, click Help Topics.  
On the Index tab, type “wiring” (don’t type the parentheses).  
Under wiring, click the module that you need wiring info for._

RMCTools can be downloaded from Delta’s website as follows:

_Go to [http://www.deltamotion.com/](http://www.deltamotion.com/)._  
_On the upper horizontal menu bar, click **Support & Training** , then click **Downloads**._  
_Click Software._  
_Choose RMCTools._

RMC70/RMC150/RMC200 Motion Controllers and RMCTools User Manual  
Notice that the user manual contains the same wiring diagrams that are in the RMCTools help. The user manual can be downloaded as follows:

_Go to [http://www.deltamotion.com/](http://www.deltamotion.com/)._  
_On the upper horizontal menu bar, click **Support & Training** , then select **Downloads**.._  
_On the left vertical menu under RMC200, RMC150/151, or RMC70, click Manuals._  
_Choose RMC70/150/200 Motion Controllers and RMCTools User Manual. The Wiring chapter contains the wiring diagrams._

Search terms: wire, wires, wiring, schematic, pinout, pin-out, pin out, pins