about axises synchronization in different rmc150

Some projects require multi-axis synchronization, but due to the distance is too long, in a RMC is not suitable.

the rmc can’t Achieve this function。 Some brands motion control can achive it.

We hope to address this in the future. However, it is possible now to a certain extent with the UI/O module. The UI/O module can send one 32-bit register in each direction between RMC150’s each loop time. This can be used to synchronize axes. For more details, in the RMCTools help, on the Index tab, type UI/O and choose Configuring UI/O channels.