Upload plots from excel back to back

Example user programs, projects, functions, program code, etc. for performing specific tasks

Upload plots from excel back to back

Postby Paul Huumala » Tue May 15, 2018 8:23 am

This example is for continuously uploading consecutive plots from Excel using RMCLink. RMCLink itself includes an example that uploads plots, but that example requires a sufficient delay between plots to upload them. The example presented here can upload plots for a motion cycle that does not pause. This method uses Plot Template 0 and Plot Template 1, which need to be identical. The user program needs to send Start Plot 0 command for the first cycle, then Start Plot 1 for the next cycle, then Start Plot 0 for the next cycle, ect. A user program is attached that starts one plot template for extend and other for retracting.

Note: Plot lengths shorter than 1.5 seconds may result in some plots not being uploaded.
Attachments
PlotUploadPingPong.rmcproj
(79.98 KiB) Downloaded 63 times
RMC150PlotUploadPingPong.xlsm
(372.68 KiB) Downloaded 26 times
RMC200PlotUploadPingPong.xlsm
(378.39 KiB) Downloaded 21 times
RMC70PlotUploadPingPong.xlsm
(379.48 KiB) Downloaded 26 times
Paul Huumala
 
Posts: 7
Joined: Wed Dec 20, 2017 12:01 pm

Return to Examples

Who is online

Users browsing this forum: No registered users and 0 guests

cron