It is not uncommon to run in to difficult to control hydraulic systems in the field, especially when retrofitting older machines with modern control systems. Delta Motion Product Development Manager Jacob Paso demonstrates of a few of the tools and tricks in Delta’s RMC motion controllers for taming difficult systems. Jacob shows how to use Quick Moves, I-PD control, and Gain Scheduling, plus a few other small tips.
*We recommend viewing the recording of Jacob’s previous webinar, “Hydraulic Cylinder Tuning: Part 1, Position Tuning” for an introduction of terms and a quick familiarization with RMCTools software if you have not used an RMC motion controller previously.