Can we have a online project for the simulation of the RMCtools software so that it counts us more.
The RMCTools software does need to be connected to a real RMC motion controller in order to show motion. Delta does have an RMC70 and an RMC150 that are connected to the internet. You can connect to them with RMCTools, set them up with the axes in simulate mode, and do motion. For more details, see http://www.deltamotion.com/education/online_rmcs/online_rmcs.php.
The RMCs can be accessed by anyone, so there is potential for conflict, and the settings may be changed at any time by anyone. However, if you save your project, then you can download it to the RMC each time, so you know it will be set up properly.
Please can i have an IP address or host address of any RMC70 sir.