Plotting Discrete Outputs/Inputs

[rezaacc]

How would I or better yet can I? I am running a program where I toggle a discrete output after applying pressure and would like to see when it occurs.

[CharlesM]

Take a look here.

Plotting Bits

Bits can not be plotted directly in RMCTools plots at this time. However, the bits can be converted to a DINT in a user program and plotted. This is done by using the SEL or select function. nBit11:=SEL(bits.11,1,0); Where: nBit11 is a user-defined DINT variable with the value of the bit to be plotted bits.11 is any bit but in this case it is bit 11 of the DWORD bits. 1 is the value assigned to nBit if true 0 is the value assigned to nBit if false It may be necessary to use different …