The integrated protocol model of BALLUFF start/stop sensors

A normal START/STOP signal consists of a interrogation signal and a start-stop signal.
But there is a special mode in the BALLUFF sensor,You can download the attachment and view the document on page 14, and introduces the common DPI and special IP mode.
When the interrogation signal (INIT) at 1-5 us, sensor into DPI mode, when the interrogation signal (INIT) at 10 to 50 us, sensor into IP mode.
I know we can receive RMC75E - MA2 DPI pattern of data, but I want to know whether can support IP mode.If can be supported, I should take what Settings
DOK_919698_02_000.pdf (5 MB)


The RMC’s do not support the Balluff IP mode.