Balluff BTL7 with MTS Magnet

Discuss and troubleshoot RMCTools along with RMC70, RMC150, and RMC200 motion controllers.

Balluff BTL7 with MTS Magnet

Postby Paul Huumala » Mon Jul 23, 2018 3:57 pm

Balluff BTL7 transducers can be tuned to read an MTS magnet. This feature comes at the cost of speed, the update frequency is substantially slower then normal.

Consider the two below transducers and their maximum sampling frequencies:
  • BTL7-S5A7-M0565-Z-MA000-KA10 487 Hz
  • BTL7-S502B-M0621-Z-SA357-S140 1845 Hz

The BTL7 transducer update rate is almost 4 times faster when tuned for a Balluff magnet vs an MTS magnet. The MA000 in the part number indicates the transducer is programed for an MTS magnet.

The BTL5 transducers do NOT display this same change in update rate when tuned for a MTS magnet.
Paul Huumala
 
Posts: 7
Joined: Wed Dec 20, 2017 12:01 pm

Return to RMCTools

Who is online

Users browsing this forum: No registered users and 1 guest

cron